TP Link TL WR841N 300Mbps WiFi Router Configuration at 192.168.0.1

Configure TP Link TL-WR841N 300Mbps Wireless N Cable Modem cum WiFi router at 192.168.0.1 to enable 4 Fast LAN Ports, which allows with quick setup, supports WPS button, and Parent Control allows major networks Jio Fibre, BSNL, ACT and more…

TPLink is a well-preferred router brand that comes with good enough configuration for WIFI, and if you have got the TpLink TL-WR841N router to get your LAN connection to Wi-Fi internet connection then there are many things that need to be done to make it secure. A Modem configuration does require a password setup for portal login along with a Wi-Fi password such that your connection and configuration portal is safe.

It is necessary to get the setup done for a WiFi router, as to launch the internet connection for your device to connect and as well to make it available with a password, and the configuration for most of the TP-Link routers is similar along with the common IP address to access the portal home for configuration setup.

TPLink TL-WR841N Router Login

To have access to the TpLink TL-WR841N WiFi router/modem website page, one should firstly login using the default credentials. Connect your router and then try to access the login page using the below-given credentials.

1. Connect your Router with LAN Broadband wire from the service provider
2. Make a connection to your PC or Laptop using a wired or Wi-Fi network
3. Now search for 192.168.0.1 IP address in your bar for the TpLink home page
4. Enter the username and password as ‘admin’ in respective columns
5. Click on the login button and that’s you will be inside the TpLink Router home page
6. Here you can configure and do any modification in regards to your TpLink TL-WR841N router directly, as well can anytime change login credentials to make them secure with security.

The login and website page for every TpLink branded router will be the same, so if you have any router with this name then the below process can be used to access and set up your TP-Link TL-WR841N.

TP Link TL WR841N WiFi Router Quick Setup

1. Visit the login page of TpLink TL-WR841N using 192.168.0.1 IP address
2. Login with default or reset login credentials to visit the homepage of the router
3. Now click on Quick Setup from the home menu to configure Internet and Wireless network
4. Select to Enable to Wireless Radio by entering your SSID name to show for Wi-Fi
5. Set your password for Wi-Fi and then click on save to save the settings
6. Click on Next button and move to Basic to view Wireless settings
7. Here selects the option for 2.5 GHz and 5 GHz with respective username
8. Select the password different that must be used for different bandwidth
9. That’s it, your new TpLink TL-WR841N router is now fully set up and its Lan wired connection is available as a Wi-Fi network with the SSID name you have set with the respective password to access internet data.

Here you will get to know how to set up the TpLink TL-WR841N portal login password with selecting the internet connection type, Remember to save this setting and not the password which will be used to access your TpLink home page.

How to Setup TP-Link TL-WR841N Router Login

1. Visit the TpLink TL-WR841N Router page and access with default login credentials
2. Once the quick setup has been done, click on Basic from the home menu
3. Here click on Internet from left side box to show on the side window
4. Here select the Internet connection type as PPPoE from drop-down
5. Set your Portal Username and Password in respective columns
6. That’s it, Once you save this stating your TpLink TL-WR841N router will be set up with a password that will be used to access the TpLink portal page. This password secures your router, as only you can access the configuration page with set credentials.