BSNL Broadband Technology (DSL / ADSL / Bharat Fiber)

Here is the different types of technologies to work for BSNL Broadband services, Check technology and find the difference which refers to higher bandwidth internet connection for your home or office over conventional telephone line provides to the customers in all India through Next Generation Network technology exchanges

DSL stands for Digital Subscriber Line, used to report a range of communication services extended over the Public Switched Telephone Network (PSTN), where the PSTN uses a pair of copper wires to connect our telephone service to the national telephony network.

DSL broadband technology enables high-speed communications over the same BSNL copper lines by arriving use of frequencies not utilized by voice communications.

ADSL which stands for Asymmetric Digital Subscriber Line service and called as a asymmetric because the download and upload speeds are not symmetrical (download is faster than upload).

ADSL2 (ITU G.992.3 and G.992.4) adds new features / functionality targeted at improving performance and interoperability and adds support for new applications and services, and an increase in the distance ADSL can reach from the local telephone exchange, dynamic data rate adaptation, better resistance to noise, diagnostics, and a stand-by mode to save power.

ADSL2 also reduces the initialization time from more than 10 seconds (as is required for ADSL) to less than 3 seconds, and ADSL2 has the same signal footprint as ADSL. ADSL2+ (ITU G.992.5) doubles the bandwidth used for downstream data transmission, effectively doubling the maximum downstream data rates, and achieving rates of 20 Mbps on telephone lines as long at 5,000 feet.

Read This  BSNL Tariff for UPN Service 1868180xxxx

ADSL2+ solutions will interoperate with ADSL and ADSL2, as well as with ADSL2+ and it will include all the feature and performance benefits of ADSL2 while maintaining the capability to interoperate with legacy ADSL equipment.

Bharat Fiber is a new fiber optic revolutionizing communication technology for today’s broadband requirement under FTTH service which uses to transmit the data speed upto Gbps in the form of light wave digital technology, and this also provides BSNL telephone signals and internet communication as like copper waves.

What is the frequency reach for DSL (ADSL or ADSL2)?

Frequency reach for telephone service is between 0kHz and 4kHz is used and 20kHz to 2.2MHz for DSL (ADSL or ADSL2) service.

Leave a Reply

Your email address will not be published. Required fields are marked *